Auto

How Can A Mechanic Modify Your Engine In Preparation For The Racetrack?

When you want to take your Mercedes around a racetrack, it needs to be in peak condition. A qualified mechanic can work on every aspect of your car to make sure that it is ready. They will lower the suspension so that your car sits closer to the road.

They will bring the seat forward so that you can grip the wheel like a racing driver and you can react quicker with the brake pedal. They will also make sure that the engine coolant and the oil have been topped up. If the tires are a little bit flat, they will fill them with air. If your brake pads are a little bit worn, they will replace them with brand new ones.

All of this work is absolutely vital in order to make sure that your car can go around the track. However, the most important task for the mechanic will be to fine-tune the engine. You can find a mechanic by visiting euromotorsport.com.au to make sure that the engine is supercharged when you are racing.

Why Is An Engine Tuning Performed Before A Car Goes On A Racetrack?

The engine needs to have as much horsepower when it is going around the track. This will make your car much faster and will ensure that the engine does not waste a drop of fuel when you put your foot down on the accelerator. You will be grateful that your engine has this extra horsepower because it will allow you to set the fastest time possible.

How Is An Engine Tune-Up Performed?

There are several steps that go into the adjustment process. The mechanic will make sure that every single process has been completed before the car is sent out on the racetrack.

Increasing Engine Displacement

The engine displacement will be increased by the mechanic in order to make the pistons travel a greater distance. This will allow for greater power in the engine.

Installing Bigger Carburettors

Bigger carburettors will allow more fuel to pass into the engine than normal and will make the car much more powerful than it usually is.

Raising The Compression Ratio

The lower the compression ratio, the more efficient the use of the cylinder pressure will be. The size of the compression chamber is reduced in order to achieve this. The mechanic will be able to do this easily.

Lowering The Temperature Under The Bonnet

The higher the temperature under the bonnet, the less fuel-efficient it is going to be. The engine temperature will be lowered by making sure the coolant system is at a higher capacity.

Adding A Turbocharging Mechanism

A turbocharging mechanism will inject compressed air into the engine. This will help the car to go much faster than it normally can.

Taking a car out onto the racetrack is extremely exciting and a mechanic will be able to tune the engine so that the car is completely ready. There will be no problems if the engine is properly tuned.