Protecting a child on board is one of the most crucial necessities that any car needs to have, and this issue cannot be ignored under any circumstances. Today the automakers are trying their best to offer the right Child restraint system (CRS) as a vital part of their safety features that can protect our little angels on the road. Nissan, as one of the pioneers in offering advanced car technologies started the Snug Kids program to ensure road safety for infants and kids.
What is Snug Kids
As described by the famous Nissan Car dealers, Snug Kids can be said to be an industry-first initiative from Nissan that is designed to help their drivers to navigate through the world of CRS. The CRS that were installed in the Nissan vehicles, had all the required modes of usage, that includes both rear-and forward-facing seats along with a booster.
How to Use
Here is a step-by-step guide on how to use the Snug Kid feature to make it work the most effective way.
- Use a non-slip mat to help stabilize the CRS easily against the seat bottom of the vehicle and in the seatback. This would work best on slick seating surfaces like leather or on liner materials.
- The ‘pool noodles’ or a pair of rolled towels are good stuff to stabilize the rear-facing restraints as they provide a proper angle for installing the CRS and nothing could be better for the infant restraint. As the Pool noodles are longer in size and has many round pieces of foam in them, it would be a great idea to cut these into a length of 10 – 12 inches and place them under the CRS to ensure a proper installation process.
- It is necessary to check that the belt didn’t get twisted and if the buckle has been fastened correctly as a twisted belt or an improperly fastened buckle might work against tightening the belt properly.
- It is found many times that unintentionally though people end up pinching the seat belt webbing while pushing it down on the CRS. If anyone is pushing down the CRS it would also push down the webbing, and in that case the webbing would not tighten properly around the CRS.
- If the seatback of the vehicle is adjustable, as it is found in some of the sport utility cars or vans, installing the CRS could be advantageous with a somewhat reclined seatback. Later, after the CRS is secured, move the seatback upright to tighten it up.
The Car dealers in SLO that the tightening of the belt around the CRS should be done through different stages.
- Tighten up the lap belt by pulling the webbing passing it through the buckles.
- Pull out the excess amount of webbing through the shoulder belt
- Continue the tightening process till it is done
The Bottom Line
Initiatives like Snug Kids deserve appreciation that shows the concern of the automakers about the child safety that should be the top-most priority of the cars to ease out the parents and caregivers of the tiny tots.